DCM-2618
The DCM-2618 is the fourth model in the DCM series: 2,600 × 1,600 mm table, load of 7,000 kg and travels of 2650 mm in X, 1850 mm in Y and 800 (1000) mm in Z.
The spindle taper is BT-50, with 18.5 / 22 kW of power in the Fanuc configuration; rapid traverse is 20 m/min in X and Y and 15 m/min in Z and the weight is approx. 22,500 kg.
Compared with the DCM-2216 it offers a larger table, longer X and Y travels, a higher load and faster rapid traverse in X (20 m/min versus 15 m/min); however, the stated power is 18.5 / 22 kW instead of 18.5 / 22 / 30 kW. The DCM-3216 increases the X travel to 3200 mm and the load to 8,000 kg, with a 3,000 × 1,300 mm table and a Y travel of 1600 mm.
| Table (clamping area) | 2,600 × 1,600 mm |
| X / Y / Z travel | 2650 / 1850 / 800 (1000) mm |
| Rapid traverse X / Y / Z | 20 / 20 / 15 m/min |
| Table load | 7,000 kg |
| Spindle taper | BT-50 |
| Spindle power (Fanuc) | 18.5 / 22 kW |
| Weight (approx.) | 22,500 kg |
| Footprint W × D × H (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the DCM-2618?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
DCM-1512
- Table mm
- 1,600×1,000
- X / Y / Z travel mm
- 1500/1200/750
- Load kg
- 2,200
- Spindle taper
- BT-40 / BT-50
DCM-2112
- Table mm
- 2,200×1,200
- X / Y / Z travel mm
- 2100/1200/750
- Load kg
- 4,000
- Spindle taper
- BT-40 / BT-50
DCM-2216
- Table mm
- 2,200×1,300
- X / Y / Z travel mm
- 2200/1600/800 (1000)
- Load kg
- 6,000
- Spindle taper
- BT-50