DCM-3222
The DCM-3222 is the sixth model in the DCM series: 3,000 × 2,000 mm table, load of 9,000 kg and travels of 3200 mm in X, 2760 mm in Y and 800 (1000) mm in Z.
The spindle taper is BT-50, with 18.5 / 22 / 30 kW of power in the Fanuc configuration; rapid traverse is 15 m/min on all three axes and the weight is approx. 33,000 kg.
Compared with the DCM-3216 it has the same X travel, but a table 2,000 mm wide instead of 1,300 mm, a Y travel of 2760 mm instead of 1600 mm and a higher load. The DCM-4222 keeps the Y travel and table width and increases the X travel to 4200 mm, the table to 3,500 × 2,000 mm and the load to 10,000 kg.
| Table (clamping area) | 3,000 × 2,000 mm |
| X / Y / Z travel | 3200 / 2760 / 800 (1000) mm |
| Rapid traverse X / Y / Z | 15 / 15 / 15 m/min |
| Table load | 9,000 kg |
| Spindle taper | BT-50 |
| Spindle power (Fanuc) | 18.5 / 22 / 30 kW |
| Weight (approx.) | 33,000 kg |
| Footprint W × D × H (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the DCM-3222?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
DCM-1512
- Table mm
- 1,600×1,000
- X / Y / Z travel mm
- 1500/1200/750
- Load kg
- 2,200
- Spindle taper
- BT-40 / BT-50
DCM-2112
- Table mm
- 2,200×1,200
- X / Y / Z travel mm
- 2100/1200/750
- Load kg
- 4,000
- Spindle taper
- BT-40 / BT-50
DCM-2216
- Table mm
- 2,200×1,300
- X / Y / Z travel mm
- 2200/1600/800 (1000)
- Load kg
- 6,000
- Spindle taper
- BT-50