MX-250
The MX-250 has the smallest turning diameter in the MX series: swing over bed of 350 mm, workpieces up to 150 mm in diameter and 250 mm in length, travel of 85 mm in X and 250 mm in Z and rapid traverse of 24 m/min.
The spindle has an A2-5 nose and a 54 mm bore, with speeds from 50 to 4,000 rpm and power of 5.5 / 7.5 kW. At approx. 2,500 kg it is the heaviest model in the series.
The MX-165 has the same spindle and the same power with a turning diameter of 200 mm and a length of 270 mm; the MX-135 also works up to 200 mm in diameter, but with an A2-4 nose, 40 mm bore and 3.7 / 5.5 kW.
| Swing over bed | 350 mm |
| Max turning Ø | 150 mm |
| Max turning length | 250 mm |
| X / Z travel | 85 / 250 mm |
| Rapid traverse X / Z | 24 m/min |
| Spindle speed | 50 – 4,000 rpm |
| Spindle power | 5.5 / 7.5 kW |
| Spindle bore | 54 mm |
| Spindle nose | A2-5 |
| Weight (approx.) | 2,500 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MX-250?
Tell us about materials and part sizes: we will get back to you with a proposal.
