VIBRANT-600
The VIBRANT-600 is a vertical machining centre of the Vibrant series with a 500 × 800 mm table, travel of 600 / 500 / 500 mm in X / Y / Z and a table load of 500 kg.
The spindle has a BT-40 taper and power of 5.5 / 7.5 kW in the Fanuc configuration; rapid traverse is 30 m/min on all three axes. The weight is approx. 4,360 kg.
Compared with the VIBRANT-500 it lengthens the table (500 × 800 versus 450 × 650 mm) and the X travel (600 versus 525 mm), with the same spindle, power and stated footprint (2332 × 2845 × 2890 mm). The VIBRANT-700 reaches 700 mm of X travel, with a 500 × 900 mm table and a table load of 550 kg.
| Table | 500 × 800 mm |
| X / Y / Z travel | 600 / 500 / 500 mm |
| Rapid traverse X / Y / Z | 30 / 30 / 30 m/min |
| Table load | 500 kg |
| Spindle taper | BT-40 |
| Spindle power (Fanuc) | 5.5 / 7.5 kW |
| Weight (approx.) | 4,360 kg |
| Footprint W × D × H (approx.) | 2332 × 2845 × 2890 mm |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the VIBRANT-600?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
VIBRANT-400
- Table mm
- 300×600
- X / Y / Z travel mm
- 410/300/300
- Table load
- 250 kg
- Spindle taper
- BT-40
VIBRANT-500
- Table mm
- 450×650
- X / Y / Z travel mm
- 525/500/500
- Table load
- 500 kg
- Spindle taper
- BT-40
VIBRANT-700
- Table mm
- 500×900
- X / Y / Z travel mm
- 700/500/500
- Table load
- 550 kg
- Spindle taper
- BT-40