DTC-600
The DTC-600 is the smallest model in the DTC series of drilling and tapping centres: 700 × 420 mm table with a load of 250 kg and travels of 600 mm in X, 420 mm in Y and 330 mm in Z.
The spindle taper is BT-30, with 5.5 / 7.5 kW of power in the Fanuc configuration and rapid traverse of 48 m/min on all three axes; the weight is approx. 2,700 kg and the footprint approx. 2,200 × 2,800 × 2,650 mm.
The DTC-700 has the same taper, the same power, the same rapid traverse, the same Y and Z travels and the same footprint, but an X travel of 700 mm, an 800 × 420 mm table and a load of 300 kg.
| Table (clamping area) | 700 × 420 mm |
| X / Y / Z travel | 600 / 420 / 330 mm |
| Rapid traverse X / Y / Z | 48 / 48 / 48 m/min |
| Table load | 250 kg |
| Spindle taper | BT-30 |
| Spindle power (Fanuc) | 5.5 / 7.5 kW |
| Weight (approx.) | 2,700 kg |
| Footprint W × D × H (approx.) | 2,200 × 2,800 × 2,650 mm |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the DTC-600?
Tell us about materials and part sizes: we will get back to you with a proposal.
