DTC-700
The DTC-700 is the largest model in the DTC series: 800 × 420 mm table with a load of 300 kg and travels of 700 mm in X, 420 mm in Y and 330 mm in Z.
The spindle taper is BT-30, with 5.5 / 7.5 kW of power in the Fanuc configuration and rapid traverse of 48 m/min on all three axes; the weight is approx. 2,800 kg and the footprint approx. 2,200 × 2,800 × 2,650 mm.
Compared with the DTC-600 it offers an X travel of 700 mm instead of 600 mm, an 800 × 420 mm table instead of 700 × 420 mm and a load of 300 kg instead of 250 kg, with the same stated footprint.
| Table (clamping area) | 800 × 420 mm |
| X / Y / Z travel | 700 / 420 / 330 mm |
| Rapid traverse X / Y / Z | 48 / 48 / 48 m/min |
| Table load | 300 kg |
| Spindle taper | BT-30 |
| Spindle power (Fanuc) | 5.5 / 7.5 kW |
| Weight (approx.) | 2,800 kg |
| Footprint W × D × H (approx.) | 2,200 × 2,800 × 2,650 mm |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the DTC-700?
Tell us about materials and part sizes: we will get back to you with a proposal.
