V-855 SUPER
The V-855 SUPER is a vertical machining centre of the Vibrant series with a 500 × 1050 mm table, travel of 850 / 510 / 510 mm in X / Y / Z and a table load of 800 kg.
The spindle has a BT-40 taper and power of 7.5 / 11 kW in the Fanuc configuration; it is the only model in the series with 36 m/min rapid traverse on all three axes. The weight is approx. 5,500 kg.
Compared with the VIBRANT-800 it has a longer X travel (850 versus 800 mm) and a table load of 800 kg instead of 600 kg, but Y and Z travel of 510 mm instead of 550 mm. The VIBRANT-900 takes the X travel to 900 mm, the Y and Z travel to 550 mm and the table load to 900 kg, with 30 m/min rapid traverse.
| Table | 500 × 1050 mm |
| X / Y / Z travel | 850 / 510 / 510 mm |
| Rapid traverse X / Y / Z | 36 / 36 / 36 m/min |
| Table load | 800 kg |
| Spindle taper | BT-40 |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Weight (approx.) | 5,500 kg |
| Footprint W × D × H (approx.) | 2570 × 3168 × 3057 mm |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the V-855 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
VIBRANT-400
- Table mm
- 300×600
- X / Y / Z travel mm
- 410/300/300
- Table load
- 250 kg
- Spindle taper
- BT-40
VIBRANT-500
- Table mm
- 450×650
- X / Y / Z travel mm
- 525/500/500
- Table load
- 500 kg
- Spindle taper
- BT-40
VIBRANT-600
- Table mm
- 500×800
- X / Y / Z travel mm
- 600/500/500
- Table load
- 500 kg
- Spindle taper
- BT-40