VIBRANT-800
The VIBRANT-800 is a vertical machining centre of the Vibrant series with a 500 × 1000 mm table, travel of 800 / 550 / 550 mm in X / Y / Z and a table load of 600 kg.
The spindle has a BT-40 taper and power of 7.5 / 11 kW in the Fanuc configuration; rapid traverse is 30 m/min on all three axes. The weight is approx. 4,800 kg.
Compared with the VIBRANT-700 the power increases (7.5 / 11 kW instead of 5.5 / 7.5 kW) and the Y and Z travel goes from 500 to 550 mm. The V-855 SUPER, with the same power, has 36 m/min rapid traverse, travel of 850 / 510 / 510 mm and a table load of 800 kg.
| Table | 500 × 1000 mm |
| X / Y / Z travel | 800 / 550 / 550 mm |
| Rapid traverse X / Y / Z | 30 / 30 / 30 m/min |
| Table load | 600 kg |
| Spindle taper | BT-40 |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Weight (approx.) | 4,800 kg |
| Footprint W × D × H (approx.) | 2602 × 2842 × 2878 mm |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the VIBRANT-800?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
VIBRANT-400
- Table mm
- 300×600
- X / Y / Z travel mm
- 410/300/300
- Table load
- 250 kg
- Spindle taper
- BT-40
VIBRANT-500
- Table mm
- 450×650
- X / Y / Z travel mm
- 525/500/500
- Table load
- 500 kg
- Spindle taper
- BT-40
VIBRANT-600
- Table mm
- 500×800
- X / Y / Z travel mm
- 600/500/500
- Table load
- 500 kg
- Spindle taper
- BT-40