MONO-1000 SUPER
The MONO-1000 SUPER has the same working area as the MONO-1000, workpieces up to 350 mm in diameter and 1,025 mm in length with travel of 185 mm in X and 1,025 mm in Z and rapid traverse of 24 m/min, but is fitted with a larger spindle.
The A2-8 nose takes the through bore to 90 mm and the three-jaw chuck to 250 mm, with power of 11 / 15 kW in the Fanuc configuration. The stated weight is approx. 5,200 kg.
Compared with the MONO-1000 (63 mm bore, 200 mm chuck) only the spindle changes: same working area, but bars and blanks of larger diameter. For longer workpieces, the MONO-1200 SUPER reaches 1,225 mm with the same spindle.
| Swing over carriage | 250 mm |
| Max turning Ø | 350 mm |
| Max turning length | 1,025 mm |
| X / Z travel | 185 / 1,025 mm |
| Rapid traverse | 24 m/min |
| Chuck | 250 × 3 mm |
| Spindle power (Fanuc) | 11 / 15 kW |
| Spindle bore | 90 mm |
| Spindle nose | A2-8 |
| Weight (approx.) | 5,200 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-1000 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO-1000
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15
MONO-1200
- Turning Ø mm
- 350
- Turning length mm
- 1,225
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15
MONO-1200 SUPER
- Turning Ø mm
- 350
- Turning length mm
- 1,225
- Spindle nose
- A2-8
- Spindle power kW
- 11 / 15