MONO-1200 SUPER
The MONO-1200 SUPER has the same working area as the MONO-1200, workpieces up to 350 mm in diameter and 1,225 mm in length with travel of 185 mm in X and 1,225 mm in Z and rapid traverse of 24 m/min, but is fitted with a larger spindle.
The A2-8 nose takes the through bore to 90 mm and the three-jaw chuck to 250 mm, with power of 11 / 15 kW in the Fanuc configuration. The stated weight is approx. 5,500 kg.
Compared with the MONO-1200 (63 mm bore, 200 mm chuck) only the spindle changes. For shorter workpieces there is the MONO-1000 SUPER, with 1,025 mm turning length; for longer workpieces the MONO-1500 SUPER, with 1,500 mm.
| Swing over carriage | 250 mm |
| Max turning Ø | 350 mm |
| Max turning length | 1,225 mm |
| X / Z travel | 185 / 1,225 mm |
| Rapid traverse | 24 m/min |
| Chuck | 250 × 3 mm |
| Spindle power (Fanuc) | 11 / 15 kW |
| Spindle bore | 90 mm |
| Spindle nose | A2-8 |
| Weight (approx.) | 5,500 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-1200 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO-1000
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15
MONO-1000 SUPER
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-8
- Spindle power kW
- 11 / 15
MONO-1200
- Turning Ø mm
- 350
- Turning length mm
- 1,225
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15