MONO-1500 SUPER
The MONO-1500 SUPER has the same working area as the MONO-1500, workpieces up to 350 mm in diameter and 1,500 mm in length with travel of 185 mm in X and 1,500 mm in Z and rapid traverse of 20 m/min, but is fitted with a larger spindle.
The A2-8 nose takes the through bore to 90 mm and the three-jaw chuck to 250 mm, with power of 11 / 15 kW (P) in the Fanuc configuration.
Compared with the MONO-1500 (63 mm bore, 200 mm chuck) the spindle changes: same working area, but bars and blanks of larger diameter. For longer workpieces, the MONO-2000 SUPER reaches 2,000 mm with the same spindle.
| Swing over carriage | 250 mm |
| Max turning Ø | 350 mm |
| Max turning length | 1,500 mm |
| X / Z travel | 185 / 1,500 mm |
| Rapid traverse | 20 m/min |
| Chuck | 250 × 3 mm |
| Spindle power (Fanuc) | 11 / 15 kW (P) |
| Spindle bore | 90 mm |
| Spindle nose | A2-8 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-1500 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO-1000
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15
MONO-1000 SUPER
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-8
- Spindle power kW
- 11 / 15
MONO-1200
- Turning Ø mm
- 350
- Turning length mm
- 1,225
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15