MONO-2000
The MONO-2000 offers the longest turning length in the Large series: workpieces up to 350 mm in diameter and 2,000 mm in length, with a swing over carriage of 250 mm, travel of 185 mm in X and 2,000 mm in Z and rapid traverse of 20 m/min.
The spindle has an A2-6 nose, a 63 mm through bore and a 200 mm three-jaw chuck; power is 11 / 15 kW in the Fanuc configuration.
Compared with the MONO-1500 the turning length increases from 1,500 to 2,000 mm, with the same spindle and the same rapid traverse. The MONO-2000 SUPER has the same working area with an A2-8 nose, a 90 mm bore and a 250 mm chuck.
| Swing over carriage | 250 mm |
| Max turning Ø | 350 mm |
| Max turning length | 2,000 mm |
| X / Z travel | 185 / 2,000 mm |
| Rapid traverse | 20 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 11 / 15 kW |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-2000?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO-1000
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15
MONO-1000 SUPER
- Turning Ø mm
- 350
- Turning length mm
- 1,025
- Spindle nose
- A2-8
- Spindle power kW
- 11 / 15
MONO-1200
- Turning Ø mm
- 350
- Turning length mm
- 1,225
- Spindle nose
- A2-6
- Spindle power kW
- 11 / 15