MONO-200
The MONO-200 opens the mid range of the MONO series: workpieces up to 350 mm in diameter and 550 mm in length, with a swing over carriage of 350 mm, travel of 185 mm in X and 550 mm in Z and rapid traverse of 24 m/min.
The spindle has an A2-6 nose, a 63 mm through bore and a 200 mm three-jaw chuck; power is 9 / 12 kW (P) in the Fanuc configuration. The stated weight is approx. 3,900 kg.
With the same working area, the MONO-250 is fitted with a 250 mm chuck and has power of 11 / 15 kW; for longer workpieces, the MONO-200 XL takes the turning length to 700 mm while keeping the same spindle.
| Swing over carriage | 350 mm |
| Max turning Ø | 350 mm |
| Max turning length | 550 mm |
| X / Z travel | 185 / 550 mm |
| Rapid traverse | 24 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 9 / 12 kW (P) |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | 3,900 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-200?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO A-5
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-5
- Spindle power kW
- 5.5 / 7.5
MONO A-6
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11
MONO-200 XL
- Turning Ø mm
- 350
- Turning length mm
- 700
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)