MONO A-6
The MONO A-6 has the same working area as the MONO A-5, workpieces up to 320 mm in diameter and 325 mm in length with travel of 170 mm in X and 325 mm in Z and rapid traverse of 30 m/min on both axes, but is fitted with a larger spindle.
The A2-6 nose takes the through bore to 63 mm and the three-jaw chuck to 200 mm, with power of 7.5 / 11 kW in the Fanuc configuration.
Compared with the MONO A-5 the spindle and power change (5.5 / 7.5 kW on the MONO A-5). For larger workpieces, the MONO-200 moves up to 350 mm in diameter and 550 mm turning length, with the same A2-6 nose and 63 mm bore and power of 9 / 12 kW (P).
| Swing over carriage | 320 mm |
| Max turning Ø | 320 mm |
| Max turning length | 325 mm |
| X / Z travel | 170 / 325 mm |
| Rapid traverse | 30 / 30 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO A-6?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO A-5
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-5
- Spindle power kW
- 5.5 / 7.5
MONO-200
- Turning Ø mm
- 350
- Turning length mm
- 550
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)
MONO-200 XL
- Turning Ø mm
- 350
- Turning length mm
- 700
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)