MONO A-5
The MONO A-5 is the entry model in the MONO series: a CNC lathe for workpieces up to 320 mm in diameter and 325 mm in length, with a swing over carriage of 320 mm, travel of 170 mm in X and 325 mm in Z and rapid traverse of 30 m/min on both axes.
The spindle has an A2-5 nose, a 54 mm through bore and a 165 mm three-jaw chuck; power is 5.5 / 7.5 kW in the Fanuc configuration.
With the same working area, the MONO A-6 is fitted with a larger spindle, with an A2-6 nose, a 63 mm bore, a 200 mm chuck and power of 7.5 / 11 kW: to be considered when machining bars or workpieces to be clamped with a larger diameter.
| Swing over carriage | 320 mm |
| Max turning Ø | 320 mm |
| Max turning length | 325 mm |
| X / Z travel | 170 / 325 mm |
| Rapid traverse | 30 / 30 m/min |
| Chuck | 165 × 3 mm |
| Spindle power (Fanuc) | 5.5 / 7.5 kW |
| Spindle bore | 54 mm |
| Spindle nose | A2-5 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO A-5?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO A-6
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11
MONO-200
- Turning Ø mm
- 350
- Turning length mm
- 550
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)
MONO-200 XL
- Turning Ø mm
- 350
- Turning length mm
- 700
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)