TMC-250 SUPER
The TMC-250 SUPER has the same working area as the TMC-250, workpieces up to 180 mm in diameter and 250 mm in length with travel of 100 mm in X and 250 mm in Z, but is fitted with a larger spindle.
The A2-6 nose takes the through bore to 63 mm and the three-jaw chuck to 200 mm, with power of 7.5 / 11 kW in the Fanuc configuration and rapid traverse of 30 m/min.
Compared with the TMC-250 only the spindle changes: same working area, but bars and blanks of larger diameter.
| Swing over carriage | 180 mm |
| Max turning Ø | 180 mm |
| Max turning length | 250 mm |
| X / Z travel | 100 / 250 mm |
| Rapid traverse (X / Z) | 30 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the TMC-250 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
TMC-250
- Max turning Ø mm
- 180
- Max turning length mm
- 250
- Spindle nose
- A2-5
- Spindle power kW
- 7.5 / 11
TMC-300
- Max turning Ø mm
- 250
- Max turning length mm
- 320
- Spindle nose
- A2-5
- Spindle power kW
- 7.5 / 11
TMC-300 SUPER
- Max turning Ø mm
- 250
- Max turning length mm
- 320
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11