TMC-300
The TMC-300 extends the working area of the TMC series: workpieces up to 250 mm in diameter and 320 mm in length, with travel of 135 mm in X and 320 mm in Z and rapid traverse of 30 m/min.
The spindle is the same as on the TMC-250, with an A2-5 nose, a 54 mm through bore and a 165 mm three-jaw chuck, and power of 7.5 / 11 kW in the Fanuc configuration. The bar capacity therefore remains that of the smaller model, while the diameter of the workpieces that can be machined increases.
If a larger spindle bore is needed in addition to the turning diameter, the TMC-300 SUPER version takes the bore to 63 mm and the chuck to 200 mm.
| Swing over carriage | 250 mm |
| Max turning Ø | 250 mm |
| Max turning length | 320 mm |
| X / Z travel | 135 / 320 mm |
| Rapid traverse (X / Z) | 30 m/min |
| Chuck | 165 × 3 mm |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Spindle bore | 54 mm |
| Spindle nose | A2-5 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the TMC-300?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
TMC-250
- Max turning Ø mm
- 180
- Max turning length mm
- 250
- Spindle nose
- A2-5
- Spindle power kW
- 7.5 / 11
TMC-250 SUPER
- Max turning Ø mm
- 180
- Max turning length mm
- 250
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11
TMC-300 SUPER
- Max turning Ø mm
- 250
- Max turning length mm
- 320
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11