TMC-300 SUPER
The TMC-300 SUPER is the most capable model in the TMC series: it combines the largest working area, workpieces up to 250 mm in diameter and 320 mm in length with travel of 135 mm in X and 320 mm in Z, with the larger spindle.
A2-6 nose, 63 mm through bore and 200 mm three-jaw chuck, with power of 7.5 / 11 kW in the Fanuc configuration and rapid traverse of 30 m/min. In the TMC series it is the only model that combines a 250 mm turning diameter with a 63 mm through bore.
Compared with the TMC-300 only the spindle changes: same working area, but bars and blanks of larger diameter.
| Swing over carriage | 250 mm |
| Max turning Ø | 250 mm |
| Max turning length | 320 mm |
| X / Z travel | 135 / 320 mm |
| Rapid traverse (X / Z) | 30 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | – |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the TMC-300 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
TMC-250
- Max turning Ø mm
- 180
- Max turning length mm
- 250
- Spindle nose
- A2-5
- Spindle power kW
- 7.5 / 11
TMC-250 SUPER
- Max turning Ø mm
- 180
- Max turning length mm
- 250
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11
TMC-300
- Max turning Ø mm
- 250
- Max turning length mm
- 320
- Spindle nose
- A2-5
- Spindle power kW
- 7.5 / 11