MONO-250 XL
The MONO-250 XL is the long-travel version of the MONO-250: workpieces up to 350 mm in diameter and 700 mm in length, with travel of 185 mm in X and 700 mm in Z and rapid traverse of 24 m/min.
The spindle has an A2-6 nose, a 63 mm through bore and a 250 mm three-jaw chuck; power is 11 / 15 kW in the Fanuc configuration. The stated weight is approx. 4,450 kg.
Compared with the MONO-250 only the turning length changes, from 550 to 700 mm. The MONO-200 XL has the same working area with a 200 mm chuck and power of 9 / 12 kW (P).
| Swing over carriage | 350 mm |
| Max turning Ø | 350 mm |
| Max turning length | 700 mm |
| X / Z travel | 185 / 700 mm |
| Rapid traverse | 24 m/min |
| Chuck | 250 × 3 mm |
| Spindle power (Fanuc) | 11 / 15 kW |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | 4,450 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-250 XL?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO A-5
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-5
- Spindle power kW
- 5.5 / 7.5
MONO A-6
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11
MONO-200
- Turning Ø mm
- 350
- Turning length mm
- 550
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)