MONO-300 SUPER XL
The MONO-300 SUPER XL is the long-travel version of the MONO-300 SUPER: workpieces up to 500 mm in diameter and 800 mm in length, with travel of 260 mm in X and 800 mm in Z and rapid traverse of 24 m/min.
The spindle has an A2-8 nose, a 90 mm through bore and a 305 mm three-jaw chuck; power is 11 / 15 kW (P) in the Fanuc configuration. The stated weight is approx. 5,150 kg.
Compared with the MONO-300 SUPER only the turning length changes, from 550 to 800 mm. The MONO-400 XL has the same working area with an A2-11 nose, a 110 mm bore, a 380 mm chuck and power of 15 / 18.5 kW (P).
| Swing over carriage | 500 mm |
| Max turning Ø | 500 mm |
| Max turning length | 800 mm |
| X / Z travel | 260 / 800 mm |
| Rapid traverse | 24 m/min |
| Chuck | 305 × 3 mm |
| Spindle power (Fanuc) | 11 / 15 kW (P) |
| Spindle bore | 90 mm |
| Spindle nose | A2-8 |
| Weight (approx.) | 5,150 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the MONO-300 SUPER XL?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
MONO A-5
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-5
- Spindle power kW
- 5.5 / 7.5
MONO A-6
- Turning Ø mm
- 320
- Turning length mm
- 325
- Spindle nose
- A2-6
- Spindle power kW
- 7.5 / 11
MONO-200
- Turning Ø mm
- 350
- Turning length mm
- 550
- Spindle nose
- A2-6
- Spindle power kW
- 9 / 12 (P)