VX-300
The VX-300 is the entry model in the VX series: a CNC lathe for workpieces up to 320 mm in diameter and 325 mm in length, with a swing over carriage of 280 mm, travel of 170 mm in X and 325 mm in Z and rapid traverse of 30 m/min.
The spindle has an A2-5 nose, a 54 mm bore and a 165 mm three-jaw chuck; power is 5.5 / 7.5 kW in the Fanuc configuration. Weight is approx. 2,900 kg.
With the same working area, the VX-300 SUPER is fitted with an A2-6 nose, a 63 mm bore, a 200 mm chuck and 7.5 / 11 kW. The VX-400 keeps the nose, bore and power of the VX-300 but takes the turning length to 425 mm.
| Swing over carriage | 280 mm |
| Max turning Ø | 320 mm |
| Max turning length | 325 mm |
| X / Z travel | 170 / 325 mm |
| Rapid traverse (X / Z) | 30 m/min |
| Chuck | 165 × 3 mm |
| Spindle power (Fanuc) | 5.5 / 7.5 kW |
| Spindle bore | 54 mm |
| Spindle nose | A2-5 |
| Weight (approx.) | 2,900 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the VX-300?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
VX-300 SUPER
- Max turning Ø mm
- 320
- Max turning length mm
- 325
- Spindle nose
- A2-6
- Weight kg (approx.)
- 3,000
VX-400
- Max turning Ø mm
- 320
- Max turning length mm
- 425
- Spindle nose
- A2-5
- Weight kg (approx.)
- 3,000
VX-400 SUPER
- Max turning Ø mm
- 320
- Max turning length mm
- 425
- Spindle nose
- A2-6
- Weight kg (approx.)
- 3,100