VX-400
The VX-400 lengthens the working area of the VX-300: workpieces up to 320 mm in diameter and 425 mm in length, swing over carriage of 280 mm, travel of 170 mm in X and 425 mm in Z and rapid traverse of 30 m/min.
The spindle has an A2-5 nose, a 54 mm bore and a 200 mm three-jaw chuck; power is 5.5 / 7.5 kW in the Fanuc configuration. Weight is approx. 3,000 kg.
Compared with the VX-300 it gains length (425 versus 325 mm) and is fitted with the 200 mm chuck instead of the 165 mm one, with the same nose, bore and power. The VX-400 SUPER, with the same working area, moves to an A2-6 nose, a 63 mm bore and 7.5 / 11 kW.
| Swing over carriage | 280 mm |
| Max turning Ø | 320 mm |
| Max turning length | 425 mm |
| X / Z travel | 170 / 425 mm |
| Rapid traverse (X / Z) | 30 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 5.5 / 7.5 kW |
| Spindle bore | 54 mm |
| Spindle nose | A2-5 |
| Weight (approx.) | 3,000 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the VX-400?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
VX-300
- Max turning Ø mm
- 320
- Max turning length mm
- 325
- Spindle nose
- A2-5
- Weight kg (approx.)
- 2,900
VX-300 SUPER
- Max turning Ø mm
- 320
- Max turning length mm
- 325
- Spindle nose
- A2-6
- Weight kg (approx.)
- 3,000
VX-400 SUPER
- Max turning Ø mm
- 320
- Max turning length mm
- 425
- Spindle nose
- A2-6
- Weight kg (approx.)
- 3,100