VX-300 SUPER
The VX-300 SUPER has the same working area as the VX-300: workpieces up to 320 mm in diameter and 325 mm in length, swing over carriage of 280 mm, travel of 170 mm in X and 325 mm in Z and rapid traverse of 30 m/min.
The spindle has an A2-6 nose, a 63 mm bore and a 200 mm three-jaw chuck; power is 7.5 / 11 kW in the Fanuc configuration. Weight is approx. 3,000 kg.
Compared with the VX-300 (A2-5 nose, 54 mm bore, 5.5 / 7.5 kW) the spindle and power change. For longer workpieces, the VX-400 SUPER has the same spindle and the same power with a turning length of 425 mm.
| Swing over carriage | 280 mm |
| Max turning Ø | 320 mm |
| Max turning length | 325 mm |
| X / Z travel | 170 / 325 mm |
| Rapid traverse (X / Z) | 30 m/min |
| Chuck | 200 × 3 mm |
| Spindle power (Fanuc) | 7.5 / 11 kW |
| Spindle bore | 63 mm |
| Spindle nose | A2-6 |
| Weight (approx.) | 3,000 kg |
Indicative technical data from the manufacturer's catalogue, subject to change without notice.
Built by MACPOWER
In-house ISO 9001 certified production: machining, spindle assembly and testing in the same plant.
Configurable
CNC control and accessories chosen together with our technical department, based on the part to be produced.
Service in Italy
Installation, acceptance testing, training and spare parts with an Italian contact person.
Would you like a quote for the VX-300 SUPER?
Tell us about materials and part sizes: we will get back to you with a proposal.
Similar models
VX-300
- Max turning Ø mm
- 320
- Max turning length mm
- 325
- Spindle nose
- A2-5
- Weight kg (approx.)
- 2,900
VX-400
- Max turning Ø mm
- 320
- Max turning length mm
- 425
- Spindle nose
- A2-5
- Weight kg (approx.)
- 3,000
VX-400 SUPER
- Max turning Ø mm
- 320
- Max turning length mm
- 425
- Spindle nose
- A2-6
- Weight kg (approx.)
- 3,100